Position Mode - NETGEAR Arlo Wire-Free User Manual

Position Mode

Position mode is available only when the camera is not streaming, recording motion,
or in Motion Detection mode.
¾ To place your camera in Position mode:
1. Tap the Arlo icon
If you are using a computer, enter
browser.
If you are using a mobile device that supports Touch ID, you are prompted to
enable Touch ID or skip.
2. Click or tap Settings.
The Settings page displays.
3. Under Camera Settings, select the camera to position.
4. Click or tap Position Mode.
The camera starts streaming video.
Note:
In Position mode, the camera streams video as fast as possible, without buffering,
so that you can aim the camera while watching on a smartphone and make near real-time
adjustments to the camera position. This means that you might see lower-quality video
while the camera is in Position mode.
Set Up Your System
on your mobile device.
arlo.netgear.com
15
in the address bar of a