What’s Included Base station Base station Ethernet cable Magnetic wall Mounting power adapter mounts screws Welcome Thank you for choosing Arlo. Getting started is easy. 100% wireless Lithium 123 batteries cameras (number of batteries varies with number of cameras)
Get the App Connect Your Base Station to the Internet For the best experience, download the Arlo app for your smartphone by scanning the QR code a. Connect the base station to your router b. Connect the AC adapter to your base below or searching for “Arlo”...
Launch the app from your smartphone Or from a computer, visit about two minutes. and tap the New System Setup button. https://arlo.netgear.com/ and follow the Follow the onscreen instructions. onscreen instructions. (If this doesn’t happen, visit https://www.arlo.com/support/...
Insert Batteries into Your Cameras Sync Your Cameras With the Base Station a. Unlock the battery c. Insert two batteries d Insert two batteries e. Close the Note: Cameras must be synced one at a time. compartment by near the back of the near the battery door.
Page 6
Sync your cameras with the base station (cont’d) b. Press the Sync button on the side of d. Press the Sync button on top of the A blue LED on the camera blinks slowly Syncing more than one camera? the base station for about two seconds. camera for about two seconds.
Tip: Use the Arlo app in Position mode If you’re mounting the camera to drywall, (found in Camera Settings) to help aim the camera. be sure to use the drywall plastic anchors that are provided.
You’re Done! Base Station LED Guide Power Internet Camera Congratulations! Your Arlo System is set up and ready to go. Green Green Green The base station The base station Cameras are To view useful tutorial videos, find troubleshooting tips, or is powered on.