Table of Contents
Advertisement
INSTALLATION
NOTE: To prevent personal injury always use a licensed electrician to install new outlets or
circuits.
1. Select a suitable location that is not susceptible to moisture and is away from drapes,
furniture and high traffic.
2. For ease of electrical connections you may wish to locate the fireplace near an exist-
ing power supply outlet. Ensure that the socket outlet will be accessible after installa-
tion of the fireplace.
3. Plan your electric power supply. A 10 amp, 240 volt circuit is required. A dedicated
circuit is preferred but not essential in all cases. A dedicated circuit will be required if
after installation, the circuit breaker or fuse trips. Additional appliances may exceed
the current rating of the circuit breaker or fuse.
4. Assemble a surround mantle and place it in the desired location.
5. Remove the fireplace unit from the package.
6. Set the unit in front of the mantle opening. Plug the power supply cord into the socket
outlet.
7. Push the fireplace into the surround mantle unitil the trim is flush with the mantle
surface, and centered within the opening.
FIREPLACE DIMENSIONS
A
B
C
38.1
85.1
74.9
D
E
F
58.4
36.3
75.2
DIMENSIONS IN CENTIMETERS
G
H
I
J
83.3
47.8
72.4
121.9
K
L
86.4
86.4
Advertisement
Table of Contents
