Samick DCP-8 Manual page 17

Voice / -
Function
This will be displayed for 1 second. Then the LED display will change to show
the currently selected Split Voice (Left Hand Voice). The default Split Voice
is Acoustic Bass.
The selected Split Voice (Left Han d Voice ) is pla yed in t he sec tion of the
keyboard from the lowest (left-most) key up to and includ ing the selected Split
Point key. (Selecting the Split Point will be explained in the next section.) The
originally selected Voice (Right Hand Voice) is played in the section of the
keyboard to the right of the selected Split Point key up to and including the highest
key on the keyboard. (The LED display will show the name of the Left Hand Voice.)
NOTE
If Voice Select is now used, it will only affect the Left Hand Split Voice. The Right
Hand Voice will stay the same until Split Mode is turned off again.
Change the Split Point
Press the [Voice/Function] button to enter Edit Mode.
Voice / -
Function
Press and hold the Split Mode (Bb-1) key.
The LED display will show 'SPL' for 1 second. After 1 second the display will
begin flashing 'SPL'.
Bb-1
Bb-1
13