Program Change,Bank Lsb And Bank Msb - Samick DCP-8 Manual

Now you are back in Performance Mode, and you can use the Data Control knob
to send values for the Continuous Controller (CC) you specified in Step 3.
NOTE
To reassign the Data Control knob for Voice Selection, press the Voice / Function
button and then press the Eb2 key. (This procedure is illustrated at the beginning of
the Function Mode
Program Change, Bank LSB, and Bank MSB
The follo wing sect ion demonstrates how to send MIDI Program Changes, Bank
LSB ( Leas t Significant Byte) and Bank MSB (Most Significant Byte) values fr om
the piano to an external MIDI device or virtual instrument software program.
Sending MIDI Program Changes
There are two ways to send MIDI Program Number changes. You can either enter
a single specific Program Number (Data Control knob assignment remains unchanged),
or you can assign the Data Control knob to send MIDI Program Changes.
1.To send a single specific Program Number (Data Control knob assignment
remains unchanged):
Press the [Voice/Function] button to enter Function Mode.
Voice / -
Function
Press the Program Key (F#5).
Data Control
[Assignable]
section.)
F#5
39