Voice/Function; Function Mode; Resetting The Data Control Knob To Voice Select - Samick DCP-8 Manual

Function Mode

In Function Mode, the keys on the piano keyboard do not make any sound. Instead,
the keys are used for selecting and editing advanced functions. In most cases, an edit
function is selected using the keyboard, and the Data Control knob is used to increase
or decrease the value of the selected editing parameter. To enter Edit Mode, press
the Voice/Function button.
C0 C1
NOTE
Regardless of how the Data Control knob is assigned, it's possible to change voices
by pressing and holding down the Voice/Function button while selecting a voice
using the Data Control knob.

Resetting the Data Control Knob to Voice Select

Press the [Voice/Function] button. It will light up.
Press the key Eb2. The LED will momentarily display SEL, and will then display
the currently selected sound. Now you can use the Data Control knob to select
sounds as before.

Voice/Function

Voice / -
Function
C2 C3
Voice / -
Function
11
C4 C5
Eb2
C6 C7