Piano Reset In Detail - Samick DCP-8 Manual

Piano Reset in Detail

As soon as the Piano Reset function is activated (by pressing the [Reverb] and
[Voice/Function] buttons simultaneously), the device will perform the following
functions:
1. Turn Local On
2. Send All Notes Off Command on MIDI Channel 1 - external and to the
internal sound engine
3. Send Reset All Controllers
and to the internal sound engine
4. Assign Data Control to V oice Select
5. Set Volume levels for Main Voice, Split Voice and Layer Voice to defaults
6. Set Pan to 64 for Main Voice, Split Voice and Layer Voice
7. Turn off Layer Mode and Split Mode
8. Set Main MIDI Transmit Channel to 1
9. Set Transpose and Octave Shift both back to zero
10. Send a Program Change = 0 on Channel 1
11. Send a Bank Change MSB = 0 and Bank Change LSB = 0 on Channel 1
12. Set the Reverb Depth back to the default value for the Default Voice
13. Send Chorus Depth = 0 on Channel 1
14. Send the current status of the Sustain Pedal on Channel 1
Command on MIDI Channel 1 - external
54