Using A Flash Media Card - Lenovo ThinkPad S3 User Manual

You also can use the integrated camera with other programs that provide features such as photographing,
video capturing, and video conferencing. To use the camera with other programs, open one of the programs
and start the photographing, video capturing, or video conferencing function. Then, the camera starts
automatically and the green camera-in-use indicator turns on. For more information about using the camera
with a program, refer to the help information system of the program.
Configuring camera settings
You can configure the camera settings to meet your needs, such as adjusting the quality of the video output.
To configure the camera settings, do one of the following:
• Open the Camera app, click the options button in the upper-left corner, and then select Settings. Follow
the instructions on the screen to configure the camera settings as desired.
• Open the Camera app, click the settings icon in the upper-right corner. Follow the instructions on the
screen to configure the camera settings as desired.

Using a flash media card

Your computer has a media card slot, it supports the following cards:
• MultiMediaCard (MMC) module
• Secure Digital eXtended-Capacity(SDXC) card
• Secure Digital (SD) card
• Secure Digital High-Capacity (SDHC) card
Note: Your computer does not support the CPRM feature for the SD card.
Attention: While transferring data to or from a flash media card, such as an SD card, do not put your
computer into sleep or hibernation mode before the data transfer completes; otherwise, your data could
become damaged.
Installing a flash media card
Attention:
• Before you start installing a card, touch a metal table or a grounded metal object. This action reduces any
static electricity from your body. Static electricity could damage the card.
To install a flash media card, do the following:
1. Ensure that the card is correctly oriented.
2. Insert the card firmly into the slot of the 4-in-1 media card reader.
If the plug-and-play feature is not enabled for the installed flash media card, do the following to enable
the feature:
1. Go to Control Panel.
2. Click Hardware and Sound.
3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the
password or provide confirmation.
4. From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts.
5. Follow the instructions on the screen.
Removing a flash media card
Attention:
42
ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide