Lenovo ThinkPad S3 User Manual page 87

Table 3. Config menu items (continued)
Menu item
Beep and Alarm
Intel AMT
Submenu item
Disable Built-in Battery
Password Beep
Keyboard Beep
Intel AMT Control
CIRA Timeout
Selection
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Permanently Disabled
0-255
Note: The default value
is 60 seconds.
Chapter 6
Comments
Use this feature to temporarily
disable the built-in battery. The
system will be automatically
powered off after you select this
item. Then the computer is ready
to be serviced.
Note: The ac power adapter
must be disconnected to perform
this operation. The built-in
battery will be automatically
enabled when the ac power
adapter is reconnected.
Enable this option to have a
beep sound when the system
is waiting for a power-on, hard
disk, or supervisor password.
Different beeps will be sounded
when the entered password
matches or does not match the
configured password.
Enable or disable the keyboard
beep when unmanageable key
combinations are pressed.
This option enables or disables
Intel (R) Active Management
Technology (AMT) function.
If you select Enabled, Intel Active
Management Technology (AMT)
is configured and additional
setup items are provided in
Management Engine BIOS
Extension (MEBx) Setup.
If you select Permanently
Disabled, you will never be able
to enable it again. Be cautious
when you want to use this option.
Note: You can enter the MEBx
Setup menu by pressing the
Ctrl+P key combination in the
Startup Interrupt Menu window.
To display the Startup Interrupt
Menu window, press the black
button or Enter key during the
power-on self-test (POST).
Set the timeout option for CIRA
connection to be established.
Selectable second values are
from 1 to 254.
If you select 0, use 60 seconds
as the default timeout value.
.
Advanced configuration
71