Installing Device Drivers; Using The Thinkpad Setup Program - Lenovo ThinkPad S3 User Manual

Country or region
China
Denmark
Finland
France
Germany
Italy
Japan

Installing device drivers

Device driver is the program that operates a particular hardware device of the computer. If a device does not
perform well or you install a new device, you need to install or update the corresponding device driver.
To download the latest device drivers, do the following:
1. Go to http://www.lenovo.com/ThinkPadDrivers.
2. Select your product name to view all the device drivers for your computer.
3. Select the device drivers that you need, and follow the instructions on the screen.
Attention: Do not download the device drivers from the Windows Update Web. Always download the device
drivers from:
http://www.lenovo.com/ThinkPadDrivers

Using the ThinkPad Setup program

The ThinkPad Setup program enables you to select various setup configurations for your computer through
configuring the BIOS.
To configure the BIOS of your computer, do the following:
1. Restart the computer. When the logo is displayed, press F1. The ThinkPad Setup program starts.
Note: If you are required to enter the supervisor password, enter the correct password. You also can
press Enter to skip the password prompt and start the ThinkPad Setup program. If you do not enter the
password, you cannot change the configurations that are protected by the supervisor password. For
more information, refer to "Using passwords" on page 53.
2. Use the pointer keys to select a tab; or use the pointer keys to locate an item and press Enter to select
it. Then a submenu is displayed.
Note: Some menu items are displayed only if the computer supports the corresponding features.
3. Set the value of an item by doing one of the following:
• Press the F6 key to change to a higher value.
• Press the F5 key to change to a lower value.
Note: Default values are in boldface.
4. To change other configurations, press the Esc key to exit the submenu and return to the parent menu.
5. When you complete the configuration, press the F10 key to save and exit. You also can select the
Restart tab in the ThinkPad Setup menu, and restart your computer with one of the provided options.
Note: You can press the F9 key to restore to the default settings.
66
ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Code
SC
DK
FI
FR
GR
IT
JP
Country or region
Netherlands
Norway
Spain
Sweden
Taiwan and Hong Kong
United States
Code
NL
NO
SP
SV
TC
US