Chapter 10. Replacing Devices; Static Electricity Prevention; Disabling The Built-In Battery - Lenovo ThinkPad S3 User Manual

Chapter 10. Replacing devices

This chapter provides instructions on how to install or replace hardware for your computer.
• "Static electricity prevention" on page 107
• "Disabling the built-in battery" on page 107
• "Installing or replacing the micro SIM card" on page 108
• "Replacing the keyboard" on page 109
• "Replacing the base cover assembly" on page 113
• "Replacing the memory module" on page 116
• "Replacing the internal storage drive" on page 118
• "Replacing the button I/O card" on page 120
• "Replacing the ac power card" on page 122
• "Replacing the speaker assembly" on page 126
• "Replacing the coin-cell battery" on page 128

Static electricity prevention

Static electricity, although harmless to you, can seriously damage computer components and options.
Improper handling of static-sensitive parts can cause damage to the part. When you unpack an option or
a CRU, do not open the static-protective package that contains the part until the instructions direct you
to install the part.
When you handle options or CRUs, or perform any work inside the computer, take the following precautions
to avoid static-electricity damage:
• Limit your movement. Movement can cause static electricity to build up around you.
• Always handle components carefully. Handle adapters, memory modules, and other circuit boards by the
edges. Never touch exposed circuitry.
• Prevent others from touching components.
• When you install a static-sensitive option or CRU, touch the static-protective package that contains the
part to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two
seconds. This reduces static electricity in the package and your body.
• When possible, remove the static-sensitive part from the static-protective package and install the part
without setting it down. When this is not possible, place the static-protective package on a smooth,
level surface and place the part on the package.
• Do not place the part on the computer cover or other metal surface.

Disabling the built-in battery

Before replacing any hardware component except the removable battery, ensure that you have disabled the
built-in battery by doing the following:
1. Turn off your computer and disconnect the ac power adapter and all cables from the computer.
2. Turn on your computer. When the ThinkPad logo is displayed, immediately press F1 to enter ThinkPad
Setup.
3. Select Config ➙ Power. The Power submenu is displayed.
4. Select Disable built-in battery and press Enter.
© Copyright Lenovo 2015 107