Table of Contents
Advertisement
2.5 Powering the Camcorder On / Off
2.5.1 Auto Power On/Off
Start the car engine, wait a few seconds to charge the camcorder, and
then screen will light up and the camcorder will automatically power on
and start recording.
Once the vehicle engine shuts down, the camcorder automatically saves
the recording and turns off the power.
Note:
The camcorder is built-in super capacitor. After start the car engine, please wait a few seconds for
charging the camcorder, and then the camcorder will automatically power on and start recording.
2.5.2 Manual Power On/Off
To manually turn on the power, press the
POWER button.
To turn off, press and hold the POWER button
for at least 2 seconds.
2.5.3 Reset
Use a pin or paper clip to insert and hold the Reset hole for 5 seconds to
reset the device.
13
Advertisement
Table of Contents
