Printing And Cutting Positions; Paper Specifications - Epson TM-T20II-i Technical Reference Manual

Printing and Cutting Positions

Manual-cutter position
Autocutter blade position
Center of the print dotline
The values above may vary slightly as a result of paper slack or variations in the paper.
Take this into account when setting the cutting position of the autocutter.

Paper Specifications

Paper types
Form
Size Roll paper diameter
Roll paper core
Roll width when taken
up
Paper width
Specified roll paper type
Specified original paper type
Paper must not be pasted to the roll paper core.
Approx. 10.5 mm
{0.41"}
Printable area
80 mm width paper printing
Specified thermal paper
Roll paper
83 mm {3.27"} maximum
Inside: 12 mm {0.47"}, Outside: 18 mm {0.71"}
80 + 0.5/-1.0 mm
{3.15 + 0.02/-0.04"}
79.5 ± 0.5 mm {3.13 ± 0.02"}
NTP080-80
P350 (Kanzaki Specialty Papers)
AF50KS-E (Jujo Thermal Oy)
F5041 (Mitsubishi HiTec Paper Flensburg GmbH)
KT55F20, KT48F20 (Koehler Paper Group)
Appendix
Approx. 27.1 mm
{1.07"}
Paper feed direction
58 mm width paper printing
58 + 0.5/-1.0 mm
{2.28 + 0.02/-0.04"}
57.5 ± 0.5 mm {2.26 ± 0.02"}
NTP058-80
137