Epson TM-T20II-i Technical Reference Manual page 53

Sound pattern (Pulse 1)
Selectable from Patterns A to E
Initial setting: Pattern A
Buzzer frequency (Pulse 1)
• Does not sound
• Sounds 1 time (initial setting)
Sound pattern (Pulse 2)
Selectable from Patterns A to E
Initial setting: Pattern B
Buzzer frequency (Pulse 2)
• Does not sound
• Sounds 1 time (initial setting)
Logo 180 dpi emulation mode
• Standard logo mode (initial setting)
• 180 dpi logo mode
Set to 180 dpi logo mode when you register graphics for 180 dpi so that the print result (203 dpi)
is the same as one printed with a 180 dpi printer.
Communication condition of serial interface
No settings are required.
Transmission speed
• 2400 bps
• 4800 bps
• 9600 bps
• 19200 bps
• 38400 bps (initial setting)
• 57600 bps
• 115200 bps
[bps: bits per second]
Chapter 2 Setup
2
53