Nv Graphics Print Mode - Epson TM-T20II-i Technical Reference Manual

NV Graphics Print Mode

You can confirm the following information by running NV graphics print mode:
• Capacity of the NV graphics
• Used amount of the NV graphics
• Unused capacity of the NV graphics
• Number of NV graphics that are registered
• Key code, number of dots in X direction, number of dots in Y direction, number of colors to be
defined.
• NV graphics data
Follow the steps below.
1
Close the roll paper cover.
2
While pressing the Feed button, turn on the printer. (Keep pressing the Feed
button until the printer starts printing.)
After the printer status is printed, the self-test printing continuance guidance is printed and
Paper LED flashes.
3
Hold down the Feed button for 1 second or more to move to mode
selection.
The mode selection guidance is printed and Paper LED flashes.
4
Press the Feed button for less than 1 second and then hold down for more
than 1 second to print the NV graphics information.
After the information is printed, the mode selection guidance is printed again.
5
To exit, turn off the printer or select "Exit and Reboot Printer".
118
"Select Modes by pressing Feed Button.
Continue SELF-TEST
Mode Selection
: Less than 1 second
: 1 second or more"