Status Sheet - Epson TM-T20II-i Technical Reference Manual

Status sheet

Make sure the product is turned on, press the push button at the interface part for approximately 3
seconds. When you release the button, a status sheet on which network parameters are printed will
be ejected. With the status sheet, you can check the network settings.
Press the push button with a thin object such as a tweezers.
If you keep pressing the button for more than 10 seconds, the network settings are
initialized.
Information on a status sheet
<General Information>
Firmware
X.XX
ePOS-Device
X.XX
Model
TM-T20II-i
Time
yyyy-mm-dd hh:mm:ss
GMT+hh:nn
<Server Direct Print>
Use
Disable
<Status Notification>
Status Notification
Disable
<Syslog Storage>
Use microSD
No
<SSL>
Use
Disable
Chapter 3 Application Development Information
3
111