Setting The Adjustment Menu Orientation; Enabling/Disabling Ddc/Ci Communication - Eizo FDS1904 User Manual

3-4. Setting the Adjustment Menu orientation

When the monitor is set to the portrait display mode, the orientation of the Adjustment Menu can be
changed as well.
Default setting: Landscape
Procedure
1. Press for five seconds or more to turn off the monitor.
2. Holding down, press
The "Optional Settings" menu appears.
3. Choose "Orientation" from "Optional Settings", and press
4. Select "Landscape" or "Portrait" with
5. Select "Finish" with
6. Press .
The "Optional Settings" menu is closed.
Note
• When using the monitor screen in a portrait position, the graphics board supporting portrait display is
required. When placing the monitor in a portrait position, the settings of your graphics board need to be
changed. Refer to the User's Manual of the graphics board for details.

3-5. Enabling/Disabling DDC/CI communication

This function allows you to enable/disable the DDC/CI communication (see
53)).
Procedure
1. Press for five seconds or more to turn off the monitor.
2. Holding down, press
The "Optional Settings" menu appears.
3. Choose "DDC/CI" from "Optional Settings", and press
4. Select "On" or "Off" with
5. Select "Finish" with
6. Press .
The "Optional Settings" menu is closed.
20
Chapter 3 Setting Monitor
for at least two seconds to turn on the monitor.
or , and press
or .
for at least two seconds to turn on the monitor.
or , and press
or .
.
.
"Chapter 8 Glossary" (page
.
.