●
To remove flickering or blurring
Procedure
1. Choose "Phase" from the "Analog Adjustment" menu, and press
2. Adjust the phase with
3. Press
to exit the adjustment.
Attention
• Flickering or blurring may not be eliminated depending on your PC or graphics board.
●
To correct the screen position
Note
• Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided
to display images correctly. The position adjustment is made to shift an image to the correct position.
Procedure
1. Choose "Hor.Position" or "Ver.Position" from the "Analog Adjustment" menu, and press
2. Adjust the position with
3. Press
to exit the adjustment.
When vertical bars appear on the screen after adjustment, go back to "To eliminate vertical bars". (Clock →
Phase → Position)
4. Close Pattern 1.
14
Chapter 2 Adjusting Screens
or
to minimize flickering or blurring.
or
.
.
.