Replacing The I/O Board; Procedure; Post-Requisites - Dell INSPIRON 15 5000 Series Service Manual

Hide thumbs Also See for INSPIRON 15 5000 Series:
Table of Contents

Advertisement

Replacing the I/O board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1
Using the alignment posts, place the I/O board on the palm rest and
keyboard assembly.
2
Align the screw holes on the I/O board with the screw holes on the palm
rest and keyboard assembly.
3
Replace the screws that secure the I/O board to the palm rest and
keyboard assembly.
4
Connect the power and volume-buttons board cable and the coin-cell
battery cable to the I/O board.
5
Slide the I/O-board cable into the connector on the I/O board and close
the latch to secure the cable.
6
Adhere the tape that secures the I/O-board cable to the I/O board.

Post-requisites

1
Replace the
2
Replace the battery.
3
Replace the
72
wireless
card.
base
cover.
computer. After working inside your
After working inside your

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inspiron 15 5000 seriesInspiron 15 5000 series 2-in-1Inspiron 15 5000Inspiron 13 5000 series 2-in-1

Table of Contents