Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Connect the display cable to the camera module.
2
Using the alignment post place the camera module on the display panel
and snap it into place.
Post-requisites
1
Follow the procedure from step 5 to step 6 in
panel".
2
Replace the
display
3
Replace the battery.
4
Replace the
base
computer. After working inside your
assembly.
cover.
After working inside your
"Replacing the display
99