Removing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
2
Remove the battery.
3
Remove the
4
Follow the procedure from step 1 to step 2 in
panel".
Procedure
CAUTION: Place the display-panel assembly on a soft and clean
surface to avoid scratching the display.
1
Place the display-panel assembly face down on a flat surface.
2
Using a plastic scribe, pry the camera module off the display-panel
assembly.
computer. After working inside your
base
cover.
display
assembly.
After working inside your
"Removing the display
97