Removing The System Board; Prerequisites; Procedure - Dell INSPIRON 15 5000 Series Service Manual

Hide thumbs Also See for INSPIRON 15 5000 Series:
Table of Contents

Advertisement

Removing the system board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You
must enter the Service Tag in the BIOS setup program after you replace
the system board.
NOTE: Replacing the system board removes any changes you have
made to the BIOS using the BIOS setup program. You must make the
appropriate changes again after you replace the system board.
NOTE: Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect the cables
correctly after you replace the system board.

Prerequisites

1
Remove the
2
Remove the battery.
3
Remove the
4
Remove the

Procedure

1
Disconnect the fan cable and the power-adapter port cable from the
system board.
2
Peel off the pieces of tape that secure the display cable and touch-screen
board cable from their respective connectors.
computer. After working inside your
base
cover.
memory
module.
heat
sink.
After working inside your
73

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inspiron 15 5000 seriesInspiron 15 5000 series 2-in-1Inspiron 15 5000Inspiron 13 5000 series 2-in-1

Table of Contents