Removing The Heat Sink; Prerequisites; Procedure - Dell INSPIRON 15 5000 Series Service Manual

Hide thumbs Also See for INSPIRON 15 5000 Series:
Table of Contents

Advertisement

Removing the heat sink

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
WARNING: The heat sink may become hot during normal operation.
Allow sufficient time for the heat sink to cool before you touch it.
CAUTION: For maximum cooling of the processor, do not touch the
heat transfer areas on the heat sink. The oils in your skin can reduce
the heat transfer capability of the thermal grease.

Prerequisites

1
Remove the
2
Remove the battery.

Procedure

1
In sequential order (as indicated on the heat sink), loosen the captive
screws that secure the heat sink to the system board.
60
computer. After working inside your
base
cover.
After working inside your

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inspiron 15 5000 seriesInspiron 15 5000 series 2-in-1Inspiron 15 5000Inspiron 13 5000 series 2-in-1

Table of Contents