Table of Contents
Advertisement
Name of part
(1)
Cover Sheet Tray
(2)
Top Tray
(3)
Stacking Tray
(4)
Output button
(5)
Booklet tray
(6)
Right cover
(7)
Left cover
(8)
Transfer Cover
(9)
Stapler cartridge
(10)
Stapler cartridge for cen-
tre binding
(11)
Booklet unit
(12)
Trash box in punching
unit
(13)
Stapler cartridge storage
* The paper capacity depends on the paper size, paper type, and orientation.
Function
Load paper used as a front cover or a back cover.
#p.2
Paper placed here is not printed on.
If the Finisher functions are not used or if the output tray is not specified
from the printer driver, prints are output here.
Paper capacity: 500 sheets (*)
If the Stapler or Offset output function is used, prints are output here.
Even if these functions are not used, this tray can be specified as the out-
put tray from the printer driver.
Paper capacity
2000 sheets (or 200 sets) (*)
Press to remove prints output on the Booklet tray so that the tray moves
to a position that facilitates removal of prints.
Booklets or twice-folded prints are output here.
Paper capacity: 20 sets (*)
-
-
If a paper jam occurs when paper is transferred from the printer to the Fin-
isher, open this cover and remove the jammed paper.
A stapler cartridge is set. Take out when replacing staples or removing
jammed staples.
#p.43 #p.46
Two stapler cartridges for booklets are set. Take out when replacing sta-
ples or removing jammed staples.
#p.44 #p.47
-
Chips generated in punching are collected here. Take out when discard-
ing chips.
#p.48
Store stapler cartridges here.
ix
Advertisement
Table of Contents
