Table of Contents
Advertisement
W00-000
Warning
Lighting location
Message
xxxxx is a tray name or a unit
name
Solution
Paper in the Cover Sheet Tray runs
out. Load paper in the tray.
The paper capacity is exceeded.
Remove paper and press the CAN-
CEL key.
An error occurs in the Finisher. Turn
off the power and on again. If the
same message appears again, contact
your local dealer (or service repre-
sentative). At this time, tell the error
number indicated in the message dis-
play of the printer.
If the CANCEL key is pressed,
the machine except the relevant
unit can be used.
Paper in the Cover Sheet Tray does
not match the paper size specified by
the printer driver. Load proper paper
and check the Operation Panel of the
printer for the paper size that has
been set in "Menu 4.11 Cover Sheet
Tray."
# "HC5500 User's Manual for
Printer Main Body"
Paper in the Interposer Tray runs out.
Load paper in the tray.
"Separation Paper" is set to "OFF" in
the menu setting of the printer. To
insert separation paper, select the
desired tray in "5.3 Separation Paper"
of the menu setting.
# "HC5500 User's Manual for
Printer Main Body."
2
27
Advertisement
Table of Contents
