Set Up Wireless Group (Lrn) - Seca 284 User Manual

......
rF* learn
Autosend
......
System
Autoprint
Time
Set up wireless group
Under certain local conditions, it may happen that the
wireless group set up at the factory does not work
perfectly. In this case, set up a wireless group using the
multifunctional display as a starting point (see "Set up
wireless group (Lrn)" on page 109). If you are
requested to switch on devices to be integrated in the
wireless group, switch on the head slide as well.
All the functions required to operate the device in a
seca wireless group can be found in submenu "rF".
.
Group (ID)
• on
• off
• on
• off
• HI
• MA
• HI_MA
• off
• Year
• Month
• Day
• Hour
• Minute
* For information on how to navigate within the menu
of the multifunctional display, see page 93.
For information on how to navigate within the menu
of the head slide, see page 103.
To set up a wireless group proceed as follows.
(Lrn)
1. Switch the device on.
2. Call up the menu.
3. Select the "rF" item from the menu.
4. Confirm the selection.
5. Select the "lrn" (learn) menu item.
6. Confirm the selection.
The wireless group currently set (here: wireless
group 0 "ID 0") is displayed.
The wireless network seca 360° wireless • 109
• Channel 1 (C1)
• Channel 2 (C2) Stop
• Channel 3 (C3)
Head slide:
Autoprint
English
Reg. Devices (M)
• on
• off