Canon VIXIA HV30 Instruction Manual page 41

- - - - - - - - - - - - - - - - - - - - - - - - - - - .... Menu Options Lists •
• This setting will be unavailable while
the camcorder is connected to an
external device using the HDMI cable.
ICA~RAJ..
. .
- ••••••••••111111+
When [AV/PHONES] is set to
[0 PHONES], adjust (~~) the volume
of the headphones with the joystick.
* In
IPLAY'~]
mode, adjust the volume
using the joystick guide (OJ 31).
I
PHONES VOL.
• The camcorder will retain the audio •
balance adjustment; however if you turn
off the camcorder, [AUDIO OUT] will be
reset to [5T·1 STERE01].
I
AV/PHONES
~ I
(OJ
30)
IC.RAJ II~YI
[I
AV
I
AV],
[0
PHONES]
~I
~I
11.··.··rgvil .
[11.0 L1R], [II LlL], [q R/R]
You can select the audio channel to use
during the playback of a tape with audio
recorded on two channels.
[11.0 LlR]: Left and Right channels
(stereo) / Main + Sub tracks (bilingual).
[ . LlL]: Left channel only (stereo) / Main
track only (bilingual).
[0 R/R]: Right channel only (stereo) /
Sub track only (bilingual).
IOUTPUTCH
I
AUDIO OUT
I
COMP.OUT
~
I
ICAlRI'JIC~RAIII····'g'.·J
00
[ a 480i], [ _ 1080i/480i]
You can select the video specifications to
use when connecting the camcorder to a
high-definition TV using the video
component connection.
[ a 480i]: To use the 480i specification
(standard definition).
[ _ 1080i/480i]: To use the full 1080i high
definition specification when possible, or
switch automatically to 480i specification
when 1080i is not supported by the TV.
• Select the [PLAYBACK STD] and
[COMP.OUT] settings according to the
specifications you want to use for
playback on a high-definition TV. Refer to
the table below.
• When the playback standard selected is
different from that of the original recording,
no video will be output.
~I
II>P~Y
' 1
[5T-1 STERE01], [5T-2 STERE02],
[1:1
MIX/FIXED], [EB MIX/VAR.]
You can select the audio track to use
during the playback of a tape with audio
dubbed over the recording.
[5T·1 STERE01]: Original sound only.
[5T-2 STERE02]: Dubbed audio only.
[1:1
MIX/FIXED]: Mixed audio with the
original sound and dubbed audio at the
same level.
[EB MIX/VAR.]: Mixed audio where the
balance between the original sound (5T-1)
and the dubbed audio (5T·2) can be
adjusted.
11)~Y<1
ST-1 •
i .
ST-Z
When [AUDIO OUT] is set to [EB MIX/
VAR.] , adjust
(~~
) the sound balance
with the joystick.
I
MIX BALANCE