Canon VIXIA HV30 Instruction Manual page 87

--------------------------~--Tmu~~ ~
Playback
Problem Solution
CO
During playback there is video Video heads are dirty. Clean the video heads. 95
noise.
Pressing the playback button Load a cassette. 20
does not start playback.
Set the camcorder to
I
PLAY,@§]
I.
29
Tape reached the end
("~
END" appears on the screen). 20
Rewind the tape.
No sound from the built-in Open the LCD panel.
-
speaker.
Speaker volume is turned off. Adjust the volume with the joystick
30
and joystick guide in
I
·Pl.AY,.@§]
I
mode.
When playing back a tape Video heads are dirty. Clean the video heads. 95
recorded in HDV standard the
playback is jerky or the sound
stutters on and off.
Image will not appear on the Set [AV" DV] to [OFF]. 39
TV screen.
Set [AV/PHONES] to
[I
AV
I
AV]. 30
Check again that the camcorder is properly connected to the TV 67
When connecting the camcorder to an HDTV using the 42
CTC-100/S Component Cable, make sure to select the correct
specification for the [CaMP OUT] setting.
There is no sound from the TV
When connecting the camcorder to an HDTV using the 67
CTC-100/S Component Cable, make sure to connect also the
audio connections using the white and red plugs of the
STV-250N Stereo Video Cable.
Text displays do not appear on If you connected the camcorder to the TV using the video
42
the TV component connection, set [DV OUTPUT] to [HDV/DV].
Tape is running, but image will
The video input on the TV is not set to the video terminal to 70
not appear on the TV screen. which you connected the camcorder. Select the correct video
input.
Video heads are dirty. Clean the video heads. 95
You attempted to play back or dub a copyright protected tape. 74
Stop playback/dubbing.
The camcorder is connected
Video input from the HDV/DV terminal cannot be output through 70
using the HDMI cable, but there the HDMI OUT terminal.
is no picture or sound from the
This may happen when playing back a tape that contains mixed
-
HDTV
recordings in different standards (HDVIDV). Disconnect the
HDMI cable and then restore the connection or turn the
camcorder off and then on again.
•
o
:::J
Q)
:::J
-
o
~
3
Q)
-
o
:::J
-