Initializing The Memory Card - Canon VIXIA HV30 Instruction Manual

I
Still Image Options •••••- - - - - - - - - - - - - - - - - - - - - - - -
[£UNC.] ¢
I
On
PROTECT
.lJ.
Press (8)
[On PROTECT]: The image selection
screen appears.
FROM THE IMAGE SELECTION SCREEN
1
Select
(~~)
the still image you
want to protect.
2
Press (8) to protect the still
image.
IOnI
appears on the bottom bar and the
image cannot be erased. Press (8)
again to cancel the image protection.
3
Repeat steps 1-2 to protect
r=o-~-.
additional images or press
[FUNC.]
twice to close the menu.
Initializing the Memory Card
Initialize new memory cards when you use
them for the first time. You may also
choose to initialize a memory card to
erase all the files in contains. The regular
initialization option [INITIALIZE] will clear
the file allocation table but will not
physically erase the stored data. If you
need to completely erase all the data,
select instead the complete initialization
option [COMPL.INIT.].
• Initializing the memory card will erase all still
images, even the protected ones. The original
still images cannot be recovered.
• When you feel the time it takes to record on or
read from the memory card has become too
long, we recommend you select the complete
initialization.
• The complete initialization may take a few
minutes, depending on the capacity of the
memory card.
• Initialize all memory cards before using them
with this camcorder.
'r
1.'gYI
1
~
(OJ 10)
&
FUNC.
(Q)
@
(CD
23)
FUNC.
T
(FUNC.)
¢I
T~
MENU
I
CARD OPERATIONS
I
INITIALIZE
I
INITIALIZE
or
I COMPL.INIT.
[@g¢:J
I'-Y_E_S_* _
*
Press
(8 )
to cancel the complete
initialization while it is in progress. All the
image files will be erased and the memory
card can be used without any problem.