Table of Contents
Advertisement
Administration (continued)
Fitting hard disk into an empty drive rack
Requirements:
●
Mounting screws for installation of hard disk drives
●
Suitable screwdriver
●
Key for hard disk drive rack
Step
Action
1
Swing out the hard disk cover on the front of the device.
2
Release the empty drive using the key.
Open the drive rack frame and pull out the drive rack frame.
Insert the hard disk to be connected into the empty drive rack and secure it with the fastening
4
screws.
Open the drive rack frame for the new hard disk and slide the hard disk into the drive rack slot of
5
the video recorder.
Swing down the frame.
6
Result: The hard disk is now connected to the video recorder.
7
Lock the drive rack using the key.
8
Swing the hard disk cover back into position.
DPR-2016/500D
2
Advertisement
Table of Contents
