Add Third Party To Conference; Join Calls Into Conference; Multi Party Conference - Cisco 9971 User Manual

Conference
You can talk with several people in a single call. You can dial another person and add them to the call. If you
have multiple phone lines, you can join two calls across two lines.
As the conference host, you can remove individual participants from the conference. The conference ends
when all participants hang up.

Add Third Party to Conference

Procedure:
Step 1
Start with a connected call that is not on hold.
Step 2
Press Conference
Step 3
Wait for the party to answer (or skip to step 4 while the call is ringing).
Step 4
Press Conference.
The conference begins.

Join Calls into Conference

The conference is established on the line that had the active call.
Procedure:
Step 1
Start with two connected calls.
Step 2
Make sure that one of the calls is active (not on hold). If both calls are on hold, resume one call.
Step 3
Press Conference
Step 4
Press the line button for the other (held) call or if the held call is on another line:
a) Press Active Calls.
b) Choose a call from the list.
c) Press Conference.
The conference begins. The conference is established on the line that had the active call

Multi party conference

The conference is established by dial the meeting ID no. provided by Help Desk on Request to connect.
and do one of the following:
•
Enter the phone number for the party you want to add and press Call.
•
Press a speed-dial button.
•
Press Speed Dial, enter a speed-dial number and press Speed Dial again.
•
Press Active Calls and select a call.
•
Select a call from the Call History.
.