Unit Settings (Normal Operating Mode); Setting The Desired Humidity Value - Defensor PH15 Operating Instructions Manual

20
5.4

Unit settings (normal operating mode)

5.4.1

Setting the desired humidity value

Standard operating display
Set value
(see chapter 5.4.2)
Note: The reference humidity value can be modified only if program mode is deactivated (see chap-
ter 5.5).
Setting range:
Factory setting:
Notes on setting:
Note: After initial commissioning or replacement of the vaporizer mat the humidification perform-
ance of the Defensor PH15/PH15A will be slightly reduced because the evaporator mat takes a
few days to become fully saturated with water. Maximum performance is available after one week,
approximately.
Furthermore, the humidification performance depends on the ambient temperature.
45%rH
Set value
New Value
Set value
Old Value
30...90 %rH
5 %rH
The optimum reference value depends on various factors. For apartments we
recommend a value of 0 – 5 %rH.
modify
confirm
cancel
Set value
45%rH
30...90 %rH