Wake-Up Time - Omnitronic DXM-0808 Operating Instructions Manual

Unlock
In order to unlock, enter the password and confirm with the ENTER-button.

Wake-up Time

Via this menu, you can adjust how the controller reacts after turning on.
Fade-in: when turning on, the outputs slowly increase to the preset output volume.
Mute Hold: all output remain muted.
Interface-Setup
Remote ID: Here, you can adjust the device ID between 1 and 255.
Operation via the software
Connect the DXM-0808/DXM-1616 via a USB-cable to your pc or laptop.
Start the software and select the correct COM-port.
CLEANING AND MAINTENANCE
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Please note: This fuse is being used for both 115 V and 230 V.
Before replacing the fuse, unplug mains lead.
24/25 00029930.DOC, Version 1.0