Copy Output Data - Omnitronic DXM-0808 Operating Instructions Manual

Copy Output Data

All settings of one output channel can be copied to another output channel.
By turning the FREQ-control, you can adjust the desired target channel.
Main menu
By pressing the MENU-button, you can enter the main menu. By pressing the ENTER-button, you can
confirm your selection. By pressing the BACK-button or NEXT-button, you can navigate the submenu.
Programs
Calling up programs
You can call up a program from already saved programs via the QUIT-button.
Press the MENU-button and the ENTER-button twice in order to call up a program. Select the desired
program via the FREQ-control. Press the ENTER-button.
Store a program
You can save up to 16 programs via the submenu Store a XOVER. Press the ENTER-button for saving. The
display shows the last used program.
By pressing the BACK-button or NEXT-button, you can navigate the submenu (e.g. enter next letter, correct
the previous one). By turning the FREQ-control, you can select the letters.
Press the ENTER-button to confirm.
Safety options
The DXO-offers the possibility to protect the settings from unauthorized access.
Modify only:
The parameters can be viewed but not be changed. Mute is possible.
Modify + View:
The parameters cannot be viewed and not be changed. Mute is possible.
Modify + Mute:
The parameters can be viewed. Changes and mute are not possible.
Everything:
Everything is locked.
By turning the FREQ-control, you can adjust the desired parameter. Press the ENTER-button to enter the
password area (4 letters).
By pressing the BACK-button or NEXT-button, you can navigate the submenu (e.g. enter next letter, correct
the previous one). By turning the FREQ-control, you can select the letters.
Press the ENTER-button to confirm.
23/25 00029930.DOC, Version 1.0