6-3-2
For F3C performance, there will be a different setting. The steel
linkage ball is at about 13-14mm away from the center of collective
servo horn. Adjust the servo rotation at 60˚ so the collective
travel range will be between -8˚ and 13˚. The servo horn will
be about 14˚ off the center when pointer is level with the 0˚ mark.
6-3-3
For 3D hot-dog flights, the steel linkage ball is also at
about 13-14mm away from the center of collective servo
horn. Adjust the servo rotates at 60˚ so the collective
travel range will be between -10˚ and 13˚. The servo
horn will be about 9˚ off the center when pointer is level
with the 0˚ mark.
Collective Travel for F3C
60˚
14˚
13-14
60˚
Collective Travel for 3D
60˚
9˚
60˚
39
-8˚
0˚
13˚
-10˚
0˚
13˚