Handsfree Operation; Auto-Answer - Mitel 5240 User Manual

Handsfree Operation

To enable Handsfree Operation:
Press HANDSFREE.
To switch from Handsfree to Handset operation during a call:
Lift the handset.
To temporarily disable/enable the microphone during Handsfree
Operation:
Press MICROPHONE (the microphone LED turns on when the
microphone is disabled).
To end a Handsfree call:
Do one of the following:
Press HANDSFREE.
Press the Hang Up command key.

Auto-Answer

This feature automatically connects internal calls to your extension. Calls are
announced by a single burst of ringing; then, the microphone and speaker
are activated and the call is answered. You can continue the call handsfree
or use the handset.
To enable or disable Auto-Answer:
Press Auto-Answer quick key.
(See Quick Key Programming for instructions on programming features to
your phone.)
To answer a call when you hear ringing:
Communicate by using the speaker and the microphone.
To end a call:
Press the Hang Up command key.
- -
OR
Wait for the caller to hang up.
-8-