Interlock Door Latch Switches - Maytag UMV1152BAB/W/Q/S Service

Disassembly Procedures
!
W AR NIN G

Interlock Door Latch Switches

Primary switch is operated by the top latch pawl on
models AMV4204A**, MMV4205A**, MMV5165A**,
AMV5206A**, MMV5207A**, JMV8208A** and by the
bottom latch pawl on models UMV1152B**,
MMV1153A**, AMV1162A**, AMV5164**.
Interlock Switch Removal
1. Disconnect power to oven and remove control panel,
(see "Control Panel" procedure).
2. Discharge high voltage capacitor, (see "High Voltage
Capacitor" procedure).
3. Test interlock switches before removing, (see Testing
Procedures).
4. Disconnect and label wire connections.
5. Remove interlock switch.
6. Reassemble in reverse order.
Primary Interlock Switch
Models AMV4204A**, MMV4205A**, MMV5165A**,
AMV5206A**, MMV5207A**, JMV8208A**
36
Latch Board
Secondary Interlock Switch
16023056 Rev. 0
To avoid the risk of electrical shock, personal injury or
death; disconnect power to oven and discharge
capacitors before following any disassembly procedure.
Models UMV1152B**, MMV1153A**, AMV1162A**,
AMV5164**
!
CAUTION
Before replacing a blown monitor fuse, test the
primary interlock switch, secondary interlock switch,
monitor switch, and power relay contacts for proper
operation. If the monitor fuse is blown by a failed
switch operation, all switches and printed circuit board
must be replaced.
Latch Board
Secondary Interlock Switch
Monitor Interlock Switch
Primary Interlock Switch
©2004 Maytag Services