Maytag UMV1152BAB/W/Q/S Service page 54

Installation Instructions
STEP 6: Attach The Oven To The Wall
To avoid risk of personal injury or property damage, you will need two people to
install this microwave oven.
1. Carefully lift microwave oven and hang it on support tabs (See
Figure 26 at the bottom of the mounting plate.) Reaching
through upper cabinet, thread power supply cord through the
power supply cord hole in the bottom of the upper cabinet. See
Figure 30.
2. Rotate the microwave oven upward so the top of oven is
against the bottom of the upper cabinet or cabinet frame.
3. Insert a bolt down through each hole in the upper cabinet
bottom. See Figure 31.
Tighten the bolts until the gap between the upper
cabinet and microwave oven is closed.
4. If wall vented or room vented installation is used, go to
No.7 on the next page.
A – 14
W A R N I N G
17
16023056 Rev. 0
power cord
power cord
hole
Figure 30
Figure 31
©2004 Maytag Services