Martin MAC III AirFX User Manual page 50

Menu level 1 Menu level 2
PARAMETER
SHORTCUTS
SHUTTER
BLACKOUT
DISPLAY
PERSONALITY
(continued)
DISPLAY
INTENSITY
DISPLAY
ROTATION
ERROR MODE
GOBO X-FADE
FACTORY
LOAD FACTORY SETTINGS
SETTINGS
50
Menu level 3 Menu level 4
Off
On
On
Off
On
2 min.
5 min.
10 min.
Auto
1 - 100%
0° / 90° / 180° / 270° / Auto
Normal
Silent with LED
On
Off
Table 3: Control menus
MAC III AirFX user manual
Notes (Default settings in bold print)
Effects avoid open positions during effects
changes
Effects take shortest route during
changes, crossing open positions if
necessary.
Shutter closes after 5 seconds when
intensity is dimmed to 0%
Shutter operation is independent of
intensity
Display permanently on
Display goes into sleep mode 2 minutes
after last key press
Display goes into sleep mode 5 minutes
after last key press
Display goes into sleep mode 10 minutes
after last key press
Display auto-adjusts to ambient light level
Manually set display intensity
Rotate display manually or set to
auto-rotate to match fixture orientation
Enable error messages and warnings in
display
Disable error messages and warnings in
display (the LED in the jog wheel will still
light to indicate fixture status if an error
has been detected or the fixture has a
warning)
Enable gobo crossfading speed
adjustment / minimum gobo wheel
scrolling speed on channel 10
Disable gobo crossfading speed
adjustment
Return all settings (except calibrations) to
factory defaults