Work light - front
•
Loosen the cables from the lamp.
•
Loosen the lamp from the lamp insert by turning the lamp
counterclockwise.
Work light - rear
•
Remove the entire connector and change the lamp-
Taillights
•
Remove the entire connector and change the lamp-
MAINTENANCE AND SERVICE
Rotating warning light
•
Remove the entire connector and change the lamp-
Main fuse
The machine has a high-power safety fuse located in a box on
the top of the battery plus terminal.
A feeder fuse for the electrical connection box is located on
the front of the battery box in the engine compartment.
Other fuses are in the electrical connection box behind right
side cover.
A blown fuse is indicated by a burnt connector. Pull the fuse
from the holder when replacing.
The fuse is there to protect the electrical system.
Do not use any other type of fuse when replacing. If it blows
again shortly after replacement, it is due to a short circuit,
which must be fixed before the machine can be put into
operation again.
Fuses - cab
Cab fuses are located on the front of the battery box in the
engine compartment.
•
Open the engine cover. For more information, see
'Removing the ride-on mower covers'.
•
A blown fuse is indicated by a burnt connector. Pull the
fuse from the holder when replacing. Do not use any other
type of fuse when replacing.
– 33
English