Settings (4) - Husqvarna 265 ACX Operator's Manual

1157068-26,265ACX_GB.book Page 60 Friday, November 28, 2014 9:06 AM
Installation shape (3-3)
Automower can be set according to three garden
®
shapes: Open, Normal and Complex.
This setting affects how Automower
working area when it mows. Above all it influences
the turning angles and how often the mower changes
direction. The Open setting optimises the pattern of
movement for an open garden. If the garden contains
a lot of small areas linked with passages a better
function will be obtained with the Complex setting.
Select:
• Open (3-3-1)
for an open lawn area with few obstacles and no
passages.
when steep slopes give an uneven mowing result.
• Normal (3-3-2)
for an average number of obstacles and/or
passages.
• Complex (3-3-3)
for a large lawn area and large number of
obstacles and/or passages.
Advanced (3-4)
• Drive past wire (3-4-2)
The front of Automower
boundary wire by a specific distance before the
mower turns. The default distance is 27 cm, but
this can be changed if required. The minimum
value is 15 cm and the maximum value is 50 cm.
To adjust the distance: Move the cursor to Drive
past wire and press YES. Now specify the
number of centimetres you want Automower
pass the boundary wire.

6.6 Settings (4)

From this option in the main menu you access the
settings.
• Security (4-1)
for PIN code, time lock, alarm and GPS settings.
The PIN code must be specified for the Security
menu to be shown.
• Language (4-2)
to select the menu language.
• Time and date (4-3)
to set the current time and day as well as the
required time and date format.
60 - English
6. MENU FUNCTIONS
covers a
®
always passes the
®
to
®
Exit angles
Open
Follow loop
Normal
Installation shape
Complex
Advanced
3-3
Exit angles
Follow loop
Installation shape Check loop
Advanced
Drive past wire
3-4
Commands
Timer Security
Installation Language
Settings Time and date
4
3-3-
3-4-
4-