Resource Configuration; Primary Graphics Adapter; Peripheral Configuration - ASROCK P4S55FX+ User Manual

Resource Configuration:

PCI Latency Timer (PCI Clocks)

Primary Graphics Adapter

F1:Help
Esc:Previous Menu
PCI Latency Timer (PCI Clocks): The default is 32. It is recommended to keep
the default value unless the inserted PCI expansion cards' specifications
require other settings.
Primary Graphics Adapter: This allows you to select [AGP] or [PCI] as the
primary graphics adapter.

Peripheral Configuration:

OnBoard FDC
OnBoard Serial Port
OnBoard Infrared Port
OnBoard Parallel Port
OnBoard Midi Port
OnBoard Game Port
OnBoard IDE
OnBoard SATA
OnBoard LAN
OnBoard AC' 97 Audio
F1:Help
Esc:Previous Menu
OnBoard FDC: Use this to enable or disable floppy drive controller.
OnBoard Serial Port: Use this to set the address for the serial port COM1.
Configuration options: [Auto], [Disabled], [3F8 / IRQ4 / COM1],
[2F8 / IRQ3 / COM2], [3E8 / IRQ4 / COM3], [2E8 / IRQ3 / COM4].
This Manual: http://www.manuallib.com/file/2446253
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
Resource Configuration
:Select Item
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
Peripheral Configuration
Parallel Port Mode
EPP Version
Parallel Port IRQ
Parallel Port DMA Channel
Midi IRQ Select
:Select Item
<Enter> to select PCI
32
clocks. Leave on
PCI
default setting for the
best PCI performance.
+/-:Change Values
Enter:Select Sub-Menu
<Enter> to enable or
Auto
disable the floppy
Auto
drive controller.
Disabled
Auto
ECP + EPP
1.9
Auto
Auto
Disabled
5
200H
Both
Enabled
Enabled
Auto
+/-:Change Values
Enter:Select
Sub-Menu
[ Setup Help ]
F9:Setup Defaults
F10:Save & Exit
[ Setup Help ]
F9:Setup Defaults
F10:Save & Exit
2 9