Resource Configuration; Peripheral Configuration - ASROCK K7S41 User Manual

Resource Configuration:

Advanced
Resource Configuration
PCI Latency Timer (PCI Clocks)
Primary Graphics Adapter
AGP Data Rate
AGP Fast Write
F1:Help
Esc:Previous Menu
PCI Latency Timer (PCI Clocks): The default is 32. It is recommended to
keep the default value unless the installed PCI expansion cards'
specifications require other settings.
Primary Graphics Adapter: If both AGPcard and PCI graphics card are
installed on the mother board, you may use this option to select PCI or AGP
as the primary graphics adapter.
AGP Data Rate: The default setting is [Auto]. You may select between [8X] or
[4X] for an AGP 3.0 card, or select among [4X], [2X], [1X] for an AGP 2.0
card.
AGP Fast Write: This allows you to enable or disable the feature of AGP fast
write protocol support.

Peripheral Configuration:

Advanced
Peripheral Configuration
OnBoard FDC
OnBoard Serial Port
OnBoard Infrared Port
OnBoard Parallel Port
Parallel Port Mode
EPP Version
Parallel Port IRQ
Parallel Port DMA Channel
OnBoard Midi Port
Midi IRQ Select
OnBoard Game Port
OnBoard IDE
OnBoard LAN
OnBoard AC' 97 Audio
OnBoard MC' 97 Modem
F1:Help
Esc:Previous Menu
AMIBIOS SETUP UTILITY - VERSION 3.31a
32
PCI
Auto
Enabled
:Select Item
+/-:Change Values
Enter:Select
AMIBIOS SETUP UTILITY - VERSION 3.31a
Auto
Auto
Disabled
Auto
ECP+EPP
1.9
Auto
Auto
Disabled
5
200
Both
Enabled
Auto
Auto
:Select Item
+/-:Change Values
Enter:Select
[ Setup Help ]
<Enter> to select PCI
clocks. Leave on
default setting for the
best PCI performance.
F9:Setup Defaults
F10:Save & Exit
Sub-Menu
[ Setup Help ]
<Enter> to enable or
disable the floppy
drive controller.
F9:Setup Defaults
F10:Save & Exit
Sub-Menu