Cpu Installation; Installation Of Cpu Fan And Heatsink - ASROCK P4S55FX+ User Manual

Hide thumbs Also See for P4S55FX+:

Table of Contents

2.1 CPU Installation

Step 1.

Unlock the socket by lifting the lever up to a 90 angle.

Step 2.

Position the CPU directly above the socket such that its marked corner

matches the base of the socket lever.

Step 3.

Carefully insert the CPU into the socket until it fits in place.

Step 4.

When the CPU is in place, press it firmly on the socket while you push

down the socket lever to secure the CPU. The lever clicks on the side tab

to indicate that it is locked.

This motherboard adopts 478-pin CPU socket to support Intel

Celeron

You also need to spray thermal grease between the CPU and the heatsink to

improve heat dissipation. Make sure that the CPU and the heatsink are se-

curely fastened and in good contact with each other. Then connect the CPU

fan to the CPU_FAN connector (CPU_FAN1, see p.7 No. 2 / p.8 No. 2). For

proper installation, please kindly refer to the instruction manuals of the CPU

fan and the heatsink.

This Manual: http://www.manuallib.com/file/2446253

The CPU fits only in one correct orientation. DO NOT force the

CPU into the socket to avoid bending of the pins.

Step 1

CPU. It requires larger heatsink and cooling fan to dissipate heat.

Step 2, 3

Step 4

Pentium

4 /

1 1

Table of Contents

P4s55fx