ASROCK P4S55FX+ User Manual page 31

OnBoard Serial Port
OnBoard Infrared Port
OnBoard Parallel Port: Select Parallel Port address or disable Parallel Port.
OnBoard Midi Port: Select address for Midi Port or disable Midi Port.
OnBoard Game Port: Select address for Game Port or disable Game Port.
OnBoard IDE: This allows you to enable or disable the onboard IDE controller.
OnBoard SATA: This allows you to enable or disable the onboard SATA
OnBoard LAN: This allows you to enable or disable the onboard LAN feature.
OnBoard AC'97 Audio: Select [Disabled], [Auto] or [Enabled] for the onboard
System Hardware Monitor: You can check the status of the hardware on your
system. It allows you to monitor the parameters for CPU temperature,
Motherboard temperature, CPU fan speed, and critical voltage.
3 0
This Manual: http://www.manuallib.com/file/2446253
Use this to set addresses for the on-board serial ports or disable serial
ports. Configuration options: [Auto], [Disabled], [3F8 / IRQ4 / COM1],
[2F8 / IRQ3 / COM2], [3E8 / IRQ4 / COM3], [2E8 / IRQ3 / COM4].
You may select [Auto] for the on-board infrared port feature, which will
enable this feature if the infrared module is installed. Or you may disable
the feature by selecting [Disabled].
Configuration options: [Auto], [Disabled], [378], [278].
Parallel Port Mode: Set the operation mode of the parallel port. The
default value is [ECP+CPP]. If this option is set to [ECP+EPP], it will
show the EPP version in the following item, "EPP Version".
Configuration options: [Disabled], [330], [300].
Midi IRQ Select: Use this to select Midi IRQ.
Configuration options: [Disabled], [200], [208].
controller. This option is available only for P4S55FX+ motherboard.
AC'97 Audio feature.
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
System Hardware Monitor
CPU Temperature
M/B Temperature
CPU Fan Speed
Chassis Fan Speed
Vcore
+ 3.30V
+ 5.00V
+ 12.00V
F1:Help
:Select Item
Esc:Previous Menu
35 C / 95 F
27 C / 82 F
3110 RPM
N / A
1.601 V
3.312 V
4.972 V
12.161 V
+/-:Change Values
Enter:Select Sub-Menu
[ Setup Help ]
F9:Setup Defaults
F10:Save & Exit