Table of Contents
Advertisement
Installing a DIMM
Step 1.
Unlock a DIMM slot by pressing the retaining clips outward.
Step 2.
Align a DIMM on the slot such that the notch on the DIMM matches the break
on the slot.
Step 3.
Firmly insert the DIMM into the slot until the retaining clips at both ends fully
snap back in place and the DIMM is properly seated.
This Manual: http://www.manuallib.com/file/2446253
Please make sure to disconnect power supply before adding or
removing DIMMs or the system components.
The DIMM only fits in one correct orientation. It will cause permanent
damage to the motherboard and the DIMM if you force the DIMM into the
slot at incorrect orientation.
notch
break
notch
break
1 3
Advertisement
Table of Contents
