Table of Contents
Advertisement
2
Slide out the keyboard (see
two clasps (c) at the bottom corners.
3
If you removed the battery when the back cover was off, you need to
turn the phone back on: Press and hold
corner of your phone until you see the Palm logo on the screen.
Screen and performance
The screen appears blank
To save power, the screen dims automatically after a period of inactivity, and
then turns off.
If you have inserted or replaced the battery, you need to press and hold
power
until you see the Palm logo on the screen. Otherwise, follow
these steps in sequence if you see a blank screen:
1
To brighten the screen if it has dimmed, tap the screen.
164
Chapter 11 : Troubleshooting
Slide out the
keyboard), and then press the
power
on the upper-right
2
To turn on the screen, do one of the following:
•
Press
power
. Drag
•
Slide out the keyboard.
•
If the keyboard is out, press any key.
3
Look closely at the screen. If the display appears but is faint, try
adjusting the screen brightness (see
4
If the problem persists, connect your phone to the AC charger (see
Charge the
battery). If you see a faint display, try to restart your phone
(see
Restart your
phone).
5
If you don't see a display or the screen doesn't respond to taps, press
and hold
power
and slide the
your phone. Please be patient while your phone starts up.
An application does not respond to taps
Tap the center of the gesture area. If the application screen minimizes to a
card, do the following:
Open
Device Info
Restart your
phone).
If the screen does not respond to taps at all, press and hold
slide the
ringer
switch three times to restart your phone. Please be patient
while your phone starts up.
up to unlock the screen.
Change screen
brightness).
ringer
switch three times to restart
and restart your phone (see
power
and
Advertisement
Table of Contents
