Using The Unlock Pattern For Login - HIKVISION DS-9608NI-I8 Quick Start Manual

device starts up. You can click YES and follow the wizard to set a strong password.

3.4 Using the Unlock Pattern for Login

For the Admin user, you can configure the unlock pattern for device login.
After the device is activated, you can enter the following interface to configure the device unlock pattern.
Steps:
Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the pattern is done.
1.

Connect at least 4 dots to draw the pattern.

Each dot can be connected for once only.
2. Draw the same pattern again to confirm it. When the two patterns match, the pattern is configured
successfully.
You can use the configured unlock pattern for future login.
3.
Network Video Recorder Quick Start Guide
Figure 3. 4 Warning of Weak Password
Figure 3. 5 Draw the Pattern
24