Playback Screen; Deleting Photos & Videos - NanoCam Plus NCP-MIRDVRHD2 User Manual

3.3 Playback Screen

This screen is used to playback photos and videos. To access the Playback Screen ensure that the camera is not recording and
short press the
button again which will bring you to the Playback Screen. In this screen the
recorded videos and photos and the
also be locked and deleted via the Playback Screen. This menu can be accessed by pressing and holding the
seconds whilst in the Playback Screen.
3.3.1 Deleting Photos and Videos
To delete an unlocked photo or video follow the instructions below.
1. Navigate to the playback screen using the instructions in the section labelled Playback Screen.
2. In the Playback Screen use the
all unlocked photos and videos select any unlocked Photo or Video).
3. Press and hold the
Delete setting and press the
4. Use the
which will delete the selected photo or video.
5. Press the
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. You will only be able to delete videos that have not been protected by a G Sensor locked recording.
3. Protected Videos are only able to be deleted by connecting the Micro SD card to a PC and manually deleting the files.
4. To easily delete all files on the inserted Micro SD Card, please refer to the instructions given in the Format section of this manual.
16
button. This will send the camera to the Photo Screen. While in the Photo Screen, short press the
button is used to play and pause videos. In the Playback Screen photos and videos can
and
button for 2 seconds to enter the Playback Menu and use the
button.
and buttons to select either Delete all, which will delete all unlocked photos and videos, or Delete Current
button to confirm the deletion.
and
buttons to select the photo or video that you want to delete (if you want to delete
buttons are used to cycle through the
and buttons to select the
button for 2