Exposure; Mute Audio; Date Stamp - NanoCam Plus NCP-MIRDVRHD2 User Manual

2.7.3 Exposure

Exposure is used to manually control the light sensitivity settings. To change the Exposure setting follow the instructions below.
1. Press the Button to stop the Mirror DVR from recording.
2. Press and hold the
3. Use the and
4. Use the and
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

2.7.4 Mute Audio

The Mute Audio setting allows you to mute the microphone during recording, or set it to record audio. To set your recording
preferences, please follow the instructions below.
1. Press the Button to stop the Mirror DVR from recording.
2. Press and hold the
3. Use the and
4. Press the button to switch between ON and OFF.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

2.7.5 Date Stamp

Date Stamp will stamp the current date and time onto the footage for future reference. To set the date stamp please follow the
instructions below.
1. Press the
button to stop the Mirror DVR from recording.
2. Press and hold the
3. Use the and
4. Press the button to switch the setting between ON and OFF.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
Button for 2 seconds to enter the Menu.
Buttons to navigate the Menu and highlight the Exposure setting and press
Buttons to highlight your desired Exposure, then press the
Button for 2 seconds to enter the Menu.
Buttons to navigate the Menu and highlight the Mute Audio setting.
Button for 2 seconds to enter the Menu.
buttons to navigate the Menu and highlight the Date Stamp setting.
to select.
button to confirm your selection.
11